What is included in the UNLOCKD High Foaming Car Wash Pro Kit?
The UNLOCKD High Foaming Car Wash Pro Kit pairs the Hypersuds Foam Cannon 2.0 with your choice of 1 L or 4 L High Foaming Car Wash. It combines pressure-washer foam application with a Canadian-made automotive shampoo for routine exterior cleaning. Choose 1 L for personal washing or 4 L if you maintain several vehicles or wash frequently. To complete your wash setup, have a compatible pressure washer, clean wash mitt, wash bucket and drying towel ready. The kit provides the foam cannon and soap; your washing technique and clean accessories remain essential to the final result.
Do I need a pressure washer, or can I connect the foam cannon to a garden hose?
You need a compatible pressure washer to operate the included Hypersuds Foam Cannon 2.0. It is a pressure-washer attachment, so a garden hose alone does not provide the required operating setup. UNLOCKD lists compatibility with most pressure washers rated at 1.2 GPM or higher. Before purchasing, check your machine’s water-flow rating and gun connection, and confirm whether an adapter is necessary. Flow rate and fitting compatibility both matter; the pressure washer’s advertised PSI alone does not establish whether the cannon will connect or perform properly.
How much High Foaming Car Wash should I put in the foam cannon?
UNLOCKD recommends approximately 100 mL of High Foaming Car Wash in the foam cannon bottle with warm water as a starting amount. Measure the soap, mix gently and adjust the cannon’s concentration control to suit your setup. This is the mixture in the reservoir, not the final dilution reaching the vehicle: the pressure washer adds more water during spraying. Start with the recommended amount before increasing concentration, and change one setting at a time so you can identify what improves coverage without wasting soap. Follow the current bottle directions if they differ.
How many washes can I get from the 1 L and 4 L kit options?
At approximately 100 mL of soap per foam-cannon mixture, the 1 L option provides about 10 mixtures and the 4 L option about 40. Treat those figures as a planning estimate rather than a guaranteed number of complete vehicle washes. A larger vehicle, a second foam application or additional soap used in a wash bucket can increase consumption. For a realistic cost per wash, measure all the concentrate you use during your normal routine. The 4 L option contains four times as much soap, making it practical for frequent washing or multiple vehicles.
Can I use this kit on a ceramic-coated or waxed car?
Yes. UNLOCKD identifies High Foaming Car Wash as a pH-neutral maintenance shampoo suitable for ceramic-coated vehicles and designed to preserve existing waxes and sealants when used correctly. Follow the recommended dilution and your protection manufacturer’s washing instructions, including any waiting period after a fresh coating application. Clean wash media and thorough rinsing remain important even with a compatible shampoo. If your vehicle also has a vinyl wrap, paint protection film or matte finish, confirm the care requirements for that specific surface rather than assuming ceramic-coating compatibility covers every finish.
Will a foam cannon clean my car without using a wash mitt?
Foaming and rinsing can remove loose contamination, but you should not expect the High Foaming Car Wash Pro Kit to deliver a complete touchless wash on every vehicle. The kit is designed to help loosen dirt before contact washing. For a thorough wash, pre-rinse loose grit, apply foam and rinse away loosened contamination before using a clean mitt with fresh wash solution. Work from cleaner upper panels toward dirtier lower areas and rinse the mitt frequently. Avoid pressing harder to remove stubborn spots; use an appropriate targeted cleaner when necessary.
Why is my foam cannon producing thin, watery foam?
Thin foam can result from the concentration setting, insufficient water flow, hard water or soap residue restricting the cannon. Start with the recommended soap amount, then check that the Hypersuds concentration control is drawing enough solution. Confirm a steady water supply and inspect the pickup tube for an obstruction or loose connection. If performance has declined since previous washes, flush the cannon and follow its cleaning instructions before adding more concentrate. Adjust one variable at a time. Foam thickness helps assess your setup, but an extremely thick blanket is not proof of better cleaning.
How do I clean and store the foam cannon after washing?
Rinse the reservoir and run clean water through the Hypersuds Foam Cannon 2.0 after use to clear remaining soap from the pickup tube and internal passages. Residue left to dry can restrict flow and contribute to weaker foam on later washes. Shut down and depressurize your pressure washer according to its instructions before disconnecting equipment. Let the bottle drain, inspect connections periodically and store the cannon somewhere protected from freezing. In Canadian winters, avoid leaving wet equipment in an unheated garage where trapped water could freeze. Follow the cannon’s instructions before disassembling any components.
