Ceramic car wash soap and ceramic spray protection serve different purposes. UNLOCKD Ceramic Car Wash cleans while adding silica-based water repellency, gloss and slickness. It suits regular maintenance on both coated and uncoated vehicles, including cars protected with compatible waxes or sealants. Choose it when you want your wash routine to refresh the finish as you clean. Its water-beading benefits do not replace a dedicated paint protection treatment.

The UNLOCKD Ceramic Coating Spray with Graphene is a separate protection step applied after washing and drying. It adds a hydrophobic layer that helps contamination release more easily during future washes. Apply a thin, even amount to cool paint, spread with a clean microfiber towel and buff clear. Keep the treated surfaces dry and avoid washing for at least 24 hours afterward.

Choose the soap for ongoing cleaning and maintenance; add the spray when you want a dedicated protective layer. Using both gives each product a clear role in your routine: wash regularly, then renew protection when needed. Neither step replaces proper surface preparation.

A touchless wash uses cleaning chemistry and rinsing pressure to remove contamination with minimal physical contact. The UNLOCKD Touchless Car Wash Soap is useful for loosening road grime and salt, particularly between more thorough washes. However, results depend on the contamination, dilution, dwell time and pressure washer setup. Persistent traffic film, dried mud or bonded deposits may remain after rinsing.

When dirt remains, follow with a careful contact wash using an appropriate shampoo and clean wash mitt. Removing loose contamination beforehand helps reduce the amount of grit carried across the paint. UNLOCKD Ceramic Car Wash can handle the maintenance wash while adding lubrication and refreshing water repellency. A foam cannon helps distribute soap, but a thick foam layer alone does not confirm that the surface is clean.

Match your method to the vehicle’s condition. A lightly dirty car may benefit from a touchless refresh, while a vehicle carrying stubborn road film needs a more complete wash. Follow the selected soap’s directions, rinse thoroughly and inspect the finish before drying.

Winter maintenance starts with removing contamination regularly. Road salt, slush and traffic film call for a different approach than light summer dust. When buildup is heavy, use an appropriate pre-wash before the main wash. UNLOCKD Touchless Car Wash Soap helps loosen winter contamination, while Ceramic Car Wash suits the maintenance stage after heavier deposits have been removed.

Before applying ceramic spray protection, thoroughly clean and dry the vehicle. Plan the application around a sheltered period that allows the required 24 hours without water exposure. Ceramic Coating Spray with Graphene can make subsequent cleaning easier, but winter driving, mileage and washing methods affect its durability. Continue washing throughout the season instead of treating one application as a guarantee of protection until spring.

Inside the vehicle, remove loose sand and debris before wiping surfaces. Premium Interior Cleaner handles everyday grime on compatible interior materials. Use controlled amounts, avoid soaking seams or electronic components, and let cleaned fabric dry thoroughly. Keeping up with smaller cleaning jobs helps prevent winter mess from becoming a much larger detailing task.

Read More

A useful detailing kit covers the jobs your vehicle actually needs: exterior washing, wheel and tire cleaning, interior maintenance, drying and paint protection. Start with those essentials, then add specialist products as specific problems arise. UNLOCKD’s Pro Kits and Build Your Own Kit offer different ways to assemble your supplies. Compare the contents with the tools and products you already own so each addition has a purpose.

For wheels and tires, choose a cleaner that matches the wheel finish. Wheel & Tire Cleaner PRO addresses brake dust, road grime and old tire dressing on its listed compatible surfaces. Cleaning and dressing are separate steps: rinse thoroughly and allow the sidewalls to dry before applying tire shine. Keep wheel and tire cleaning tools separate from those used on paint.

For the cabin, Premium Interior Cleaner suits routine dirt on compatible plastic, vinyl, leather, fabric and carpet. Test unfamiliar materials first, and follow the vehicle manufacturer’s guidance for screens and delicate trim. Include enough clean microfiber towels to separate interior cleaning, exterior drying and protection application. A well-chosen kit makes the routine easier to repeat without relying on one product or towel for every surface.

Are UNLOCKD car-care products made in Canada?

UNLOCKD is Canadian-owned, and its car-care formulas are blended in Canada using ingredients sourced worldwide. For shoppers looking for Canadian-made detailing chemicals, that distinction identifies where the formulas are manufactured without suggesting that every raw ingredient originates here. The range includes automotive shampoos, exterior cleaners, interior-care products and paint protection. Manufacturing claims for bottled formulas should also be distinguished from the origin of accessories and equipment: check the individual listing when Canadian manufacture is a deciding factor for a particular tool, towel or hardware item.

Can I use UNLOCKD products on PPF, vinyl wraps or matte paint?

Compatibility depends on the individual product and the exact finish; there is no blanket approval across the UNLOCKD range. Paint protection film, vinyl wraps and matte or satin paint can require different maintenance products, even when they look similar. Check the film or vehicle manufacturer’s guidance alongside the selected product’s directions. Products intended to increase gloss, including Wash & Wax and Spray Wax, require particular consideration when preserving a matte appearance. If compatibility is not explicitly confirmed, contact UNLOCKD with the product name and details of your finish before applying it.

Why does my ceramic-coated car still get water spots?

Ceramic protection does not stop dissolved minerals from remaining on the surface when water evaporates. Water beading and resistance to mineral deposits are different properties, so visible spotting does not automatically mean your protection has failed. When maintaining a vehicle treated with UNLOCKD ceramic products, avoid letting rinse water dry on the panels. Wash the affected area first; persistent deposits may need a water-spot remover explicitly approved for the existing protection and surface. Marks that remain after deposits are removed may be etching, which requires assessment rather than repeated aggressive cleaning.

Will the Hypersuds Foam Cannon 2.0 work with my electric pressure washer?

An electric pressure washer can be suitable if it meets the Hypersuds Foam Cannon 2.0’s stated minimum flow requirement of 1.2 GPM and has a compatible connection. Check water flow and fittings before purchasing; a high advertised PSI rating alone does not establish compatibility. This cannon requires a pressure washer and does not connect directly to a standard garden hose. If foam output is watery, check the soap concentration, adjustment controls, water conditions and pickup system before adding more chemical. Flush the cannon after use to prevent dried residue from affecting performance.

Why does my car’s paint still feel rough after washing?

Roughness on otherwise clean paint can indicate bonded contamination that ordinary shampoo has not removed. The UNLOCKD Clay Pad Polisher & Detailer addresses this type of surface contamination, helping restore a smoother feel. Despite its name, it is a decontamination tool rather than a scratch-removal polish. Use a suitable clay lubricant, light pressure and a frequently cleaned working surface. Claying can leave light marring, particularly on sensitive paint, so assess whether treatment is necessary instead of doing it automatically at every wash. Existing coatings and specialty finishes require additional compatibility checks.

How do I remove dried bugs from my car without scrubbing the paint?

Soften the residue with a dedicated automotive insect remover before attempting to lift it away. UNLOCKD Insect Remover targets dried bug splatter on exterior painted surfaces, including bumpers, hoods and mirror caps. Apply according to the label on a cool surface, keep the product from drying and rinse thoroughly. Stubborn deposits may need another treatment or gentle agitation instead of harder scrubbing. Remove insects promptly after highway trips whenever practical. If the residue comes off but a mark remains, the clear coat may already be stained or etched; additional bug remover will not necessarily correct that damage.

How many washes can I get from a bottle of UNLOCKD High Foaming Car Wash?

At the listed bucket-wash amount of approximately 100 mL per 20 L of water, a 500 mL bottle prepares about five buckets, a 1 L bottle ten, a 4 L jug forty and a 20 L container two hundred. These are measured solution batches, not guaranteed vehicle counts: a larger vehicle or a wash requiring extra solution can use more. Foam-cannon consumption also depends on adjustment and spraying time. Compare sizes using your actual product use per wash, and measure the shampoo instead of pouring by eye to keep consumption predictable.