What does UNLOCKD Wheel & Tire Cleaner PRO remove?
UNLOCKD Wheel & Tire Cleaner PRO breaks down stubborn brake dust, road grime, dirt and accumulated buildup on wheels and tire sidewalls. It also deep-cleans rubber to remove tire blooming, old dressing residue and embedded grime that can leave sidewalls looking brown or uneven. When used correctly, the result is a thoroughly cleaned wheel and a more uniform tire surface ready for rinsing, drying and the application of a fresh tire dressing. This professional-grade, non-acid formula is made in Canada for routine maintenance, complete details and more demanding wheel-and-tire cleaning jobs.
How do I use UNLOCKD Wheel & Tire Cleaner PRO correctly?
Begin with wheels and tires that are cool to the touch, preferably while working in the shade. Pre-rinse thoroughly to remove loose dirt, sand and debris. Spray the cleaner evenly over the wheel surface and tire sidewall, then allow it to dwell for 1–5 minutes without letting it dry. Agitate stubborn areas with a suitable wheel brush, detailing brush or tire brush when necessary. Rinse completely using a strong stream of water or a pressure washer. Inspect the surface afterward and repeat the process on heavily contaminated areas instead of extending the dwell time.
Is Wheel & Tire Cleaner PRO safe for all wheel finishes?
Wheel & Tire Cleaner PRO is suitable for clear-coated, chrome, painted and powder-coated wheels when used according to the directions. Its non-acid formula provides strong cleaning performance without relying on harsh acidic wheel-cleaning chemicals. Always work on a cool surface, avoid direct sunlight when possible and never allow the cleaner to dry. For aftermarket, refinished, damaged or unusually delicate wheels—or any finish not specifically listed—test the product on a small, inconspicuous area first and follow the wheel manufacturer’s care instructions. Rinse thoroughly so no cleaner or loosened contamination remains.
Does Wheel & Tire Cleaner PRO need to be diluted?
No dilution ratio is specified for Wheel & Tire Cleaner PRO, so it should be sprayed directly and evenly onto the pre-rinsed wheel and tire as directed. Apply enough cleaner to cover the contaminated surfaces, but avoid unnecessary overspray or excessive product use. The amount required will vary according to wheel size, spoke design and the severity of the brake dust or tire buildup. Diluting the cleaner without a recommended ratio may reduce its intended cleaning performance. For the best and most consistent results, use it according to the supplied application instructions and rinse it completely before it can dry.
Can I clean both my wheels and tires with the same product?
Yes. Wheel & Tire Cleaner PRO is formulated to clean wheel surfaces and rubber tire sidewalls during the same detailing step. On wheels, it loosens brake dust, road grime and dirt. On tires, it removes blooming, old dressing residue and accumulated contamination that can interfere with the appearance and application of a new tire shine. Use separate wheel and tire brushes to avoid transferring abrasive brake dust onto the rubber or other surfaces. After cleaning, rinse both areas thoroughly and allow the tire sidewall to dry completely before applying an UNLOCKD tire dressing.
Do I need to scrub the wheels and tires, or can I simply spray and rinse?
Light contamination may release during the dwell and rinse stages, but agitation is recommended whenever brake dust, road grime or tire buildup remains. Use a soft wheel brush or detailing brush on compatible wheel finishes and a dedicated tire brush on the sidewalls. This helps the cleaner reach textured rubber, lug areas, narrow spokes and recessed sections where contamination tends to collect. Avoid aggressive scrubbing with unsuitable tools that could mark a delicate finish. For heavily soiled wheels or tires, repeat the cleaning process after rinsing rather than leaving the product on longer than the recommended 1–5 minutes.
Will Wheel & Tire Cleaner PRO remove tire blooming and old tire shine?
Wheel & Tire Cleaner PRO is designed to deep-clean tire sidewalls and remove unwanted blooming, road grime, buildup and old dressing residue. Thorough cleaning is particularly important before applying a new tire shine because leftover contamination can cause an uneven finish or reduce how well the dressing adheres to the rubber. Spray the sidewall evenly, allow the cleaner to dwell without drying and agitate it with a suitable tire brush. Rinse completely and inspect the rubber. Tires with several layers of old dressing or substantial blooming may require a second application before the sidewall looks uniformly clean.
How often should I clean my wheels and tires?
Clean your wheels and tires whenever brake dust, road grime or visible tire buildup begins to accumulate. Daily-driven vehicles may benefit from cleaning during each regular wash, while vehicles producing heavier brake dust may need more frequent attention. During Canadian winter and spring conditions, inspect the wheels more often because wet road film, slush and salt-contaminated grime can accumulate quickly. Avoid allowing thick contamination to remain for extended periods, as it generally becomes harder to remove. Wheel & Tire Cleaner PRO cleans existing contamination but does not leave behind a wheel coating, corrosion barrier or tire dressing.
How many vehicles can I clean with one bottle?
The number of vehicles depends on wheel size, spoke complexity, contamination level, spray coverage and whether a second application is needed. Because these factors vary considerably, a fixed number of washes cannot be accurately guaranteed. Using controlled, even coverage instead of oversaturating the surface will help reduce waste without sacrificing cleaning performance. Wheel & Tire Cleaner PRO is available in a 236.6 mL sample, 500 mL, 1 L, 4 L and 20 L sizes. Smaller formats suit testing and personal maintenance, while the larger containers are practical for frequent detailing, multi-vehicle households and professional shops.
