How is the UNLOCKD Ceramic Car Wash Pro Kit different from a regular car wash kit?
The Ceramic Car Wash Pro Kit centres on a silica-infused car wash soap that cleans while enhancing gloss, slickness and water beading. A conventional shampoo primarily removes dirt; this formula also adds hydrophobic properties during washing. Its pH-neutral formulation makes it suitable for routine maintenance, including vehicles with existing paint protection. Expect a clean, glossy finish with improved water repellency after proper washing and rinsing. The kit is intended for maintenance washing, rather than paint correction or installing a permanent ceramic coating.
Can I use Ceramic Car Wash on ceramic-coated, waxed or uncoated paint?
Yes. UNLOCKD Ceramic Car Wash is suitable for ceramic-coated vehicles, paint protected with wax or sealant, and vehicles without an existing protective treatment. On protected paint, it provides maintenance cleaning while supporting gloss and water-repellent performance. On uncoated paint, its silica-infused formula adds slickness and water beading during washing. For a freshly installed coating, follow your installer’s instructions about when to perform the first wash and which maintenance products to use. Compatibility with these paint protection systems should not automatically be extended to matte finishes or specialty films.
Do I need a pressure washer to use the Ceramic Car Wash Pro Kit?
You need a compatible pressure washer when using the Hypersuds Foam Cannon; the Ceramic Car Wash soap itself can also be used for traditional bucket washing. The Hypersuds Foam Cannon 2.0 requires at least 1.2 GPM of water flow and does not connect directly to a standard garden hose. Before purchasing, check your pressure washer’s flow rating and gun connection, including whether an adapter is needed. Adequate flow, correct soap concentration and proper cannon adjustment all contribute to consistent foam coverage.
How much Ceramic Car Wash soap should I put in a foam cannon?
UNLOCKD recommends approximately 100 mL of Ceramic Car Wash as a starting amount for foam-cannon use. Add warm water to the solution bottle, leaving room for the measured soap, then mix and adjust the cannon’s solution control for even coverage. This is a reservoir mixing instruction, not a fixed concentration reaching the paint: the pressure washer adds more water during application. Follow the bottle’s directions if they differ, and avoid adding excessive concentrate simply to produce thicker-looking foam.
How many washes can I get from a bottle of Ceramic Car Wash?
At approximately 100 mL of concentrate per wash, 1 L provides about 10 washes and 4 L provides about 40 washes. These are planning estimates based on measured product consumption, rather than guaranteed vehicle counts. Larger vehicles, extra foam passes and different cannon settings can increase usage. If you prepare separate foam-cannon and wash-bucket solutions, count the concentrate added to both when calculating your total consumption. Measuring each dose makes it easier to estimate your actual cost per wash and plan refills.
Can I just foam the car and rinse it, or do I still need a wash mitt?
For a thorough maintenance wash, plan to use a clean wash mitt when dirt or road film remains after foaming and rinsing. Ceramic Car Wash is a maintenance shampoo, and applying it through a foam cannon does not automatically make the process touchless. Pre-rinse loose contamination, apply the diluted solution and rinse away loosened dirt before proceeding with a lubricated contact wash where needed. Work gently from cleaner upper panels toward dirtier lower sections, rinse thoroughly and dry. Never allow the wash solution to dry on the vehicle.
How long does the water-beading effect last, and does it replace a ceramic coating?
The enhanced water beading has no specified fixed lifespan, and Ceramic Car Wash does not replace a dedicated ceramic coating or ceramic protection spray. Its role is to refresh hydrophobic performance during routine cleaning. How long that effect remains noticeable depends on driving conditions, weather, washing frequency and the protection already on the vehicle. Use it as part of ongoing maintenance, with a separate protective treatment when longer-lasting protection is your goal. Visible water beading after washing should not be interpreted as proof of a newly installed durable coating.
Is the Ceramic Car Wash Pro Kit suitable for winter road salt and heavy road grime?
Ceramic Car Wash can serve as the main maintenance shampoo for a winter-driven vehicle, but substantial salt, grit and stubborn road film may require a separate pre-wash. Thoroughly rinse away loose contamination first, then use an appropriate pre-wash where needed before contact washing. Follow with Ceramic Car Wash to clean the remaining everyday dirt and refresh the finish. Choose pre-wash products compatible with your vehicle’s protection and follow their dilution instructions. Adding more ceramic shampoo is not a substitute for choosing the right cleaner for heavy contamination.
